Air Entraining Agent
Air Entraining Agent can significantly improve the workability of concrete, reduce the segregation and bleeding of concrete, improve the pumpability and the frost resistance and durability of concrete. This product overcomes the shortcomings of other air-entraining products such as poor solubility, inconvenient use, and large loss of compressive strength.
ASTM C 494, Type F; ASTM C 1017, GB8076-1997 and GB50119-2003.
Main Use & Advantages
1. It can improve the volume stability and outdoor durability of concrete structures.
2. It can be used to prepare the requirements of freeze-thaw resistance. Test before use to determine whether there is any slump loss.
3. .It is suitable for preparing c20-c50 ordinary concrete, concrete, hydraulic concrete, anti-freeze, durability requirements, etc.
4. It is can produce uniform,stable and non-destructive bubbles in concrete.
Packing ,Storage and Transportation
1, This product is liquid, should be stored in a plastic container with a cover, avoid the rain water leakage and sundries mixed with or moisture to evaporate run dry;
2, Storage process leakage, prevent sun, heat, avoid direct sunlight and below freezing preservation;
3, Shelf life is 6 months, expire inspection qualified rear can use.
4, This product is no alkali liquid, non-toxic, non-corrosive, non-polluting products to the environment, but do not eat; When contact with eyes, you should clean up as soon as possible.
5.Can be used for the preparation with requirements of freezing-thawing resistence, test to determine.
6.Slump loss before use or Require manufacturers to adjust.