Contact Us
Add:D2-111, Zhongyi 1688 Creative Industrial Park, No.1022 Beilao Road, Qingdao,China
Tel: +86-532-80920099
Mob: +8618669790499

Concrete Admixture

Polycarboxylate Ether For Concrete

Polycarboxylate Ether For Concrete

Polycarboxylate Ether is one ideal product used for the ready-mix concrete industry which has the ability to work in low water/cement ratios....
Chat Now

Polycarboxylate Ether for Concrete


It is a new generation superplasticizer for concrete. It contains polycarboxylate ether polymers and is specially formulated for ready-mix concrete where slump retention, high strength and durability are required in hot climates. It is chloride-free, meets SS EN 934, Set retarding/high range water reducing/superplasticizing admixtures, and ASTM C 494 requirements for Type F & G. It is also compatible with all cements meeting the ASTM standards.

It is the ideal admixture for the ready-mix concrete industry. The ability to work with low water /cement ratios and still obtain extended slump retention allows for the manufacture of high quality concrete.

Standards Compliance

PCE/PE complies with the requirements of the following standards: ASTM C 494, Type F; ASTM C 1017 .

Main Use & Advantages

Polycarboxylate Superplasticizer of high slump retention is mainly used in high temperature to formulate pumping concrete. Its main features are as follows:

(1) High water reducing rate: Water reducing rate can be above 30% under optimal dosage (confirmed by lab test).

(2) High slump retention: concrete slump value can be increased to more than 220mm from 70-90mm under the same water cement ratio, and good workability will be kept. There is no obvious slump loss within 30min, or no obvious bleeding. Slump value keeps above 150-180mm within 1h. Pumping ability is excellent.

(3) Long durability: low chloride and alkali content; can decrease concrete long-term shrinkage and shrinkage crack; Concrete shrinkage ratio will be less than 110%. Suitable air content and foaming structure will ensure concrete long durability if our product is used.

(4) Production clean degree is high: Due to formaldehyde, industrial naphthalene, acetone or other flammable and toxic chemicals being not used in production process, it meets cleaning production standard. This new production technology is a fully automated process without heat production.

(5) Safety: non-toxic, no radiation, non-inflammable, no corrosion for steel bar or aggregate, and no formaldehyde, or aromatic residues harmful for human. Our product complies with the current environmental friendly standard of interior and exterior construction.

Hot Tags: polycarboxylate ether for concrete, China, suppliers, manufacturers, factory, buy, cheap, low price, made in China
  • Newsletter
  • Categories
  • Contact Us
    Add:D2-111, Zhongyi 1688 Creative Industrial Park, No.1022 Beilao Road, Qingdao,China
    Tel: +86-532-80920099
    Mob: +8618669790499
  • QR Code
  • Copyright © Shandong Tiancheng Hongsha Construction Materials Co.,Ltd All Rights Reserved.